Washing Machine Box

Just another Edublogs.org site

How to Take Apart a GE Top Load Washer

April 16, 2012 by fserwtxx7698 · No Comments · Uncategorized


Unplug the electrical cord from
Best Washing Machine
the wall outlet. Unscrew the water hoses from the fittings on the back of the machine using a pair of slip-joint pliers. Remove the drain hose from the sink. Pull the washer away from the wall.


Slide a putty knife between the top with the washer and the front panel about 3 inches from
Best Washing Machine
the left corner. Feel with the knife for a spring clip and press in on it with the putty knife to release it. Pull up on the top slightly on the left side and use the putty knife in the same way on the right side to release the clip on that sideHow to Take Apart a GE Top Load Washer. Pull up the top, then flip it back and lean it against the wall.


Unscrew the screws on the top from the front panel using a Phillips screwdriver. There will be one or two screws on each side with the top with the front panel. Remove the screws at the bottom from the front panel if there are any. The screws might be under a kick plate that is on clips that can be pulled out by hand. Pull out the front panel and set it aside.


Remove the screws that hold on the back access panel using a nut driver. The panel is held on with four screwsHow to Take Apart a GE Top Load Washer. Lift off the panel and set it aside.

No Comments so far ↓

There are no comments yet...Kick things off by filling out the form below.

Leave a Comment